Tel: +44 (0) 1885 485 070
Fax: +44 (0) 1885 489 417
Email: info@apreco.co.uk
Product Data – APSF 123
Items: Air Pressure Stabiliser with backing flanges to fit a standard wall thickness range of 100 to 165mm. Extended rear backing flanges can be supplied to accommodate deeper walls.
Materials: Carbon / stainless steel frames and blades to suit.
Standard Finish: RAL9010 powder coated white Apreco-Ag™, antimicrobial protection as standard.
Bearings: Stainless Steel ball roller type sealed for life ball bearings.
Pressure Control Range: 3 - 50 Pa with a setting accuracy of +/- 1 Pa.
Unit Selection:
To obtain an indicative size of standard 100mm to 165mm walls with APSF 123 use Table A below to calculate the total blade length of blade required and divided it into sections of equal length using values from Table B. The blades can then be accommodated into single or dual column matrix frames.
Example:
Selecting a stabiliser capable of transferring 220 l/s (0.22m³/s)@ 14Pa.
Therefore 220 x 4.39 = 966 mm of total blade length.
Where: 220 (Volume of l/s)
4.39 (Factor from Table A relating to 14Pa)
Table A (Factors)
Pa |
Factor |
Pa |
Factor |
Pa |
Factor |
3 |
9.49 |
15 |
4.25 |
35 |
2.78 |
5 |
7.35 |
20 |
3.68 |
40 |
2.60 |
8 |
5.81 |
22 |
3.51 |
45 |
2.45 |
10 |
5.20 |
25 |
3.29 |
50 |
2.33 |
11 |
4.96 |
30 |
3.00 |
||
14 |
4.39 |
32 |
2.91 |
Divide this total into equal lengths using one of the standard blade lengths from Table B.
It is suggested that consideration should be made regarding any physical restrictions the building may impose before calculating the blade lengths of units.
Table B (Blade Lengths)
200 |
325 |
450 |
575 |
700 |
225 |
350 |
475 |
600 |
725 |
250 |
375 |
500 |
625 |
750 |
275 |
400 |
525 |
650 |
|
300 |
425 |
550 |
675 |
\966 divided by 2 (blades) = 483mm.
Round up to the nearest 25mm increment gives you 2 x 500 mm blades.
Where: 966 (Total blade length)
500 (Standard blade length from Table B)
Useful Tip: Using as few blades as possible will result in the most cost-effective solution.
Dimensions:
Nominal Size Matrix:
Height single row (base unit) |
Height each additional row |
Width single column |
123mm |
+133mm per row |
Blade length |
Aperture Size Matrix:
Height single row (base unit) |
Height each additional row |
Width single column |
171mm |
+133mm per row |
Blade length + 48mm |
Over flange Size Matrix:
Height single row (base unit) |
Height each additional row |
Width single column |
223mm |
+133mm per row |
Blade length+ 100mm |
Download Product datasheet:
